Prepared according to Annex II of EC Regulation 1907/2006
Page 3/5
Motor Cleaner
07.
Handling and storage
· Handling
· Precautions for safe handling
Keep containers tightly sealed. Ensure good ventilation/exhaustion at the workplace. Prevent formation of
aerosols.
· Information about protection against explosions and fires:
No special measures required.
. Conditions for safe storage, including any incompatibilities
· Storage
· Requirements to be met by storerooms and containers:
Bestimmungen gemäß Wasserhaushaltsgesetz beachten.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: Keep container tightly sealed.
08. Exposure controls/personal protection
· Additional information about design of technical systems:
No further data; see item 7.
· Control parameters
· Components with critical values that require monitoring at the
workplace:
112-34-5 2-(2-butoxyethoxy)ethanol
IOELV (European Union)
WEL (Great Britain)
Short-term value: 101.2 mg/m³ 15 ppm
Long-term value: 67.5 mg/m³ 10 ppm
Short-term value: 101.2 mg/m³ 15 ppm
Long-term value: 67.5 mg/m³ 10 ppm
· Additional information:
The lists that were valid during the compilation were used as basis.
· Exposure controls
· Personal protective equipment
· General protective and hygienic measures
Keep away from foodstuffs, beverages and food.Instantly remove any soiled and impregnated
garments.Wash hands during breaks and at the end of the work.Do not inhale gases / fumes /
aerosols.Avoid contact with the eyes and skin.
BG-Regeln beachten.
· Breathing equipment:
In case of brief exposure or low pollution use breathing filterapparatus. In case of intensive or longer
exposure use breathingapparatus that is independent of circulating air.
· Protection of hands: Alkaline resistant gloves
· Material of gloves Nitrile rubber, NBR
· Penetration time of glove material
The exact break trough time has to be found out by the manufacturer ofthe protective gloves and has to
be observed.
· Eye protection: Tightly sealed safety glasses.
· Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Fluid
Colour: Colourless
· Smell: Mild
· pH-value (100 g/l) at 20°C: 12
· Change in condition
Melting point/Melting range: Not determined
Boiling point/Boiling range: 100°C
· Flash point: Not applicable
· Ignition temperature: 225°C
· Self-inflammability: Product is not selfigniting.
· Danger of explosion: Product is not explosive.
· Steam pressure at 20°C: 23 hPa
· Density at 20°C 1.04 g/cm³
· Solubility in / Miscibility with
Water: Fully miscible
· Solvent content:
Organic solvents: 5.0 % Water: 85.2 % Solids content: 6.2 %
09. Physical and chemical properties
Printing Date: 27.01.2011 Revision Date: 27.01.2011
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels